Tree-Shock™

Tree-Shock™

Tree-Shock was designed to have a unique, aesthetically-pleasing appearance. When the bird/animal’s foot touches the positive and negatively-charged wires, it gets a shock that trains them to stay away.

  • Where to Use: Tree branches
  • Target Bird: All bird species, and other wildlife too
  • Bird Pressure: All pressure levels
  • Material: UV-Stabilized PVC and Stainless Steel
  • Installation: Tubing is mounted using zip ties and nailed ties
  • Installation Level: Somewhat involved
  • Application: Easy to mount and connect using special ties that wrap around smaller branches that can also be attached to larger branches using aluminum nails. NOTE: Working in and around trees can be dangerous; using professional installers is recommended
  • How it Works: When the bird/animal’s foot touches the positive and negatively-charged wires, it gets a shock that trains them to stay away.
  • Tree-Shock was designed to have a unique, aesthetically-pleasing appearance

Tree-Shock™ Installation

Tree-Shock Installation Guideline
 
Tree-Shock Installation: Holiday Light Method






Tree-Shock Holiday Light Method

When small birds land in the canopy of the tree (leaves, smaller branches), it may be advisable to protect the tree from the outside. Birds will land on the perches (the Tree-Shock system strung from limb to limb), and get shocked before going deeper into the tree.

Important Notice: Trees grow. Limbs grow longer and thicker. Once each year the system should be checked and adjusted. Be prepared to replace Cable Ties, repair damage, adjust the tubing on the limbs and test the voltage.

 

How to Make a T Connection with Tree-Shock

Tree-Shock Installation: How to Make a T-junction Connection

(1) Identify the two wires to attach the Female Snap Taps.
(2) Cut the black nylon with a utility knife.
(3) Slide the open Marlin Spike under the wire.
(4) Slide the Snap Tap under the wire and snap shut.
(5) Make sure the wire stays in the metal groove.

  1. $22.25 - $1,039.80
    Tree Shock

    The flexible, tubular construction conforms to all branch configurations. It's effective against all bird species, and other wildlife too. Mount it to branches, or string perches between the ends of branches to form an outer shield.

  2. $49.10 - $239.35
    Lead-Out Wire

    Available in rolls of beige and black, twisted copper, 14 gauge double wire. It is easy to cut, strip & crimp. 

  3. $71.10
    Charger
    This battery charges up to 200 feet of track. It is ideal for small jobs such as signs that can?t justify the cost of a large charger. Two D-Cell batteries will power the system for two months.

    Input Voltage: 3 VDC, 13 mA
    Output Voltage: 7.5 kV (+/-) 20% open circuit intermittent DC output

  4. $8.20 - $70.65
    Connectors & Mounting Parts

    Connectors join wiring together, which can be attached to the tree branch with various mounting parts. 

  5. $20.40 - $52.25
    Tools
    Several tools are required to install the Tree-Shock System.
  6. $68.45
    Voltage Tester
    It is important to make sure your system is sending the correct amount of electricity. This tester reads in 100-volt increments.
  7. $8.40
    Warning Signs
    These bold, plastic warning labels should be placed prominently on the buildings. They can be glued or screwed to the ledge or side of the building. 10 per pack.