Hardware & Adhesives

Bond Guidelines (10.2 oz.)
BirdSlide: 25 feet
Bird-Flite: 35 feet
Birdwire Bases*: 125 bases
Coil clips: 275 clips
DLL PVC Bases: 35 bases
Bird-Shock Flex-Track: 35 feet

*Use Super Bond for Birdwire bases supporting end posts.

Super Bond Guidelines (50 ml)
Bird-Flite: 8 feet
Birdwire Bases: 40 bases
Coil clips: 60 clips
DLL PVC Bases: 10 bases

Hilti .27 Shot


Fits into the chuck of your power drill and allows you to drive small and heavy duty screws into wood fast and easy. Just get the eye started, slip the driver over the loop and screw it in.

Magnetic Net Setters

Ideal for driving self-tapping screws with a cordless hand drill. Magnetic tip holds the screw in place while you start the hole.


For Bird Coil Clips, Birdwire, Bird-Flite, Bird-Shock Flex-Track, and Daddi Long Legs.

An exceptionally strong but flexible, adhesive. It handles dramatic temperature changes without cracking and adheres Bird Barrier products to most surfaces. For best results the mounting surface must be dry, completely clean and prepped. Full cure is in 24 hours at normal temperatures, but under some circumstances it can be usable in as little as four hours.


Plastic Anchor (100 pk.)

Stainless Wood Screw (100 pk.)

Hilti Pins

Fire into steel or concrete using the power-actuated tool to secure various brackets. Use X-ENDI pin for thick steel (more than 1/2"), and X-DNI for thinner steel and masonry.

Self-Tapping Screws

Use to fasten Bird Barrier brackets and clips to different metals. Small screws use 1/4" nut driver; large screws uses a 5/16" nut driver. Galvanized is recommended for dry and salt-free climates.
Find Installer Ask AN Expert